Detail Metal Detector METAL SHARK® OCTA
The Cassel metal detector METAL SHARK® OCTA 1800x1800 reduces the rejection of valuable logs. Only logs that pose a real danger to the saw are rejected.
We achieve this goal because the METAL SHARK® detects metal throughout the sensor aperture with almost the same sensitivity. Conventional metal detectors find very small nails on the outside of logs. These do not pose apotential danger to the saw. However, big metal parts inside the log are not detected. The new Cassel metal detector detects outside and inside the log the same metal objects. Therefore, logs not posing a potential danger to the saw are not rejected.
Type METAL SHARK® OCTA
Installation Conveyor belt, typically horizontal, but every angle is possible.
Sensor head not devidable.
Metal free zone Over all at least 4 meters
Before/ after detector Moving / vibrating metal = 1, 5x aperture height
Power supply 230 V / 50 Hz / 1 phase or115 V / 60 Hz / 1 phase
Power input 700 Watts
Surrounding temperature -10...+ 50 C / 15...120 F
Product temperature -20...+ 80 C / 0...180 F
Protection class Control unit IP65 ( Nema 4x, 12) Sensor head IP54 ( Nema 35) when set up outdoor we suggest an additional protection
Sensor head Stainless steel housing, non-corrosive
Control unit Mounted to the side of the sensor
( Option: mounting it on a wall with connection cable) ,
Digital noise filters eliminate undesired signals.
Product effect memory for 120 products
Automatic teach assistant
Digital delay line Yes, to directly control reject devices.Delay and duration adjustable from 0 - 9, 990 ms
Belt speed 25 - 4.000 mm/ sec. ( 1” - 6, 6 feet/ sec.)
Measuring principle Inductive, balanced coils, Multi-channel-interpretation
Control unit Newest digital technologyDigital noise filterDigital balancingDigital temp. drift controlConstant automatic checks
Handling Keyboard and LC-DisplayLEDs for signal amplitudeLEDs for operating status password protection
Output signals metal alarm 1x potential-freeChange-over contact ( 230V/ 5A) 1x SPS-control 24V/ 3mA1x switching output 24V/ 30mA
Output signals error 1x potential-freeChange-over contact ( 230V/ 5A)
Input signals Reject synchronization ( 24V) Quit metal alarm ( 24V)
Interface ( Optional on demand) RS232, Rs485, Ethernet
Options, accessories
* Booster type SPD to increase detection performance
* Xenon warning flash lamp
* Acoustic alarm
Metal Detector Indonesia.
Bpk.Agung
Jl. Radin Inten II No. 62 Duren Sawit Jakarta Timur
Phone: ( 021) 8690 6777, 8690 6771
Fax: ( 021) 8690 6770
Hp: 0816 1740 8986
Web: www.metaldetectorindonesia.com
Tampilkan Lebih Banyak