Detail CS 5000™ Walk-Through Metal Detector
Features
• Microprocessor technology in detection and control circuitry— includes 20 standard application programs.
• Overhead control unit: LCD, alarm light, LED bar graph and control touchpads— plus all wiring, connections and electronics— are integrated into a single overhead compartment to eliminate exposure of wires and the external control box.
• Uniform coverage from archway to floor.
• Greater sensitivity for detecting metal weapons— maximum of 200 distinct sensitivity levels.
• Continuous online report of operating status.
• Tamper proof settings through computerized access codes.
• Three levels of ankle-boost sensitivity.
• Self diagnostic program: complete and automatic.
• Noise reduction to prevent false alarms.
• Rugged, lightweight design for simple maintenance and easy portability.
• Easy assembly: designed with only four ( 4) pieces and eight ( 8) screws. Simple-to-follow instructions.
• Optional battery pack for use anywhere; provides up to 20 hours of backup.
• Limited 24-month warranty: parts and labor.
Technical Specifications:
Operating Temperatures
-4° F ( -20° C) to + 149° F ( 65° C) without Battery Backup Module or CMA; -4° F ( -20° C) to + 140° F ( 60° C) with Battery Backup Module and/ or CMA; Humidity: To 95% noncondensing.
Power
Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 55 watts; no rewiring, switching or adjustments required. Power supply meets UL, CSA, TUV and VDE standards.
Weatherproofing / Foreign Object Protection Standards
Meets IP 31, IEC Standard. " Degrees of Protection provided by Enclosures, " IEC 529.
Interference Suppression
100% sensor coil Faraday shielding; special Garrett built-in circuitry for noise suppression and ignoring x-ray monitor horizontal sync.
Traffic Counter
Built-in and resettable with current reading available on LCD panel.
Synchronization
Multiple channels permit several CS 5000s and other Garrett detectors to operate simultaneously in close proximity.
Alarms
Ready light indicates unit is operational; alarm lights and audible alarms are activated when the target amount of metal is detected; LED bar graph indicates amplitude of alarm signal.
Tamper-Proof
Dual-level access codes required to set or change all sensitivity settings and detection programs; one level for use by supervisors in selecting programs and sensitivity and the other for initial set-up and overall control; non-resettable sequence code logs all changes made whenever sensitivity codes are accessed. An audible alarm reports unauthorized attempts at access.
Infrared Sensor
Improves analysis of detection signal; increases throughput; helps eliminate " false alarms" and also provides accurate traffic counter.
Control Outputs
Solid state switches ( low voltage AC or DC) for operating external alarms and control devices.
Masking
Programs designed to eliminate the problem of dissimilar targets canceling each other.
Construction
Attractive scratch and mar-resistant laminate with resilient end caps; control panel and cross members made of heavy duty aluminum.
Warranty
24 months, parts and labor
Bpk.Agung
Metal Detector Indonesia.
Jl. Radin Inten II No. 62 Duren Sawit Jakarta Timur
Phone: ( 021) 8690 6777, 8690 6771
Fax: ( 021) 8690 6770
Hp: 0816 1740 8986, 0882 1220 9853
PIN BB : 54BC081F
Web: www.metaldetectorindonesia.com
Tampilkan Lebih Banyak